Baxi EcoBlue Advance 13 Heat ErP Installation And Service Manual page 31

Baxi EcoBlue Advance 13, 16, 19, 25, 30 Heat ErP Installation Manual
Fig. 24
Fig. 25
Fig. 26
Fig. 27
page 36
10. Remove the boiler blank adaptor and replace with the boiler adaptor ensuring that the gasket is in position. Replace the gasket if necessary
11. Insert the flue through the hole in the wall. Fit the elbow to the boiler adaptor, ensuring that it is pushed fully in
12. Draw the flue back through the wall and engage it in the elbow. It may be necessary to lubricate to ease assembly of the elbow and flue
13. Ensure that the terminal is positioned with the slots to the bottom
It is essential that the flue terminal is fitted as shown to ensure correct boiler operation and prevent water entering the flue.
There must be no part of the air duct (white tube) visible outside the property after installation.
31 of 55
http://interpart.partsarena.eu/System/DATA/Dx/DS1/installation/S219/...
(Fig. 31). Secure the flue to the elbow with the screws supplied
(Fig. 28).
(Fig. 29).
(Fig. 30).
(Fig. 30).
23/01/2018, 11:44