To Install The Anchor Bolts - Daikin VAM350J7VEB Installer And User Reference Manual

6 Installation
Installation tips:
▪ Installing the unit upside down allows for common use of the
inspection hole, reducing the required maintenance space. For
example, if 2 units are installed closely together, ONLY 1
inspection hole is required for maintaining or replacing filters, heat
exchange elements,...
a
c
b
a Control box
b Maintenance cover
c Inspection hole
▪ When the heat reclaim ventilation unit is installed upside down,
the minimum allowed outdoor air temperature is 5°C. If this
CANNOT be guaranteed, you MUST install a heater to heat up the
outdoor air to 5°C.
▪ Keep in mind that the ceiling hooks have to be reinstalled when
the heat reclaim ventilation unit is installed upside down. They
have to be rotated 180°, so that they are upside down (see the
illustration).
Installer and user reference guide
14
a
a Ceiling hook
b Maintenance cover
6.3

To install the anchor bolts

Prerequisite: Before you install the anchor bolt, check if foreign
objects such as vinyl and paper are still inside the fan housing. If so,
remove them.
1 Install the anchor bolt (M10 to M12).
2 Pass the metal suspension bracket through the anchor bolt.
3 Secure the anchor bolt with washer and nut.
For VAM350~1000:
For VAM1500+VAM2000:
a Ceiling hook
b Nut
c Washer
d Double nuts
NOTICE
Always hang up the unit by its suspension brackets.
6.4 Duct connections
Do NOT connect the ducts as follows:
b
a
b
c
d
a
b
c
d
VAM350~2000J7VEB
Heat reclaim ventilation unit
4P487293-1 – 2017.08