Assembly - ProForm PATL50707.0 User Manual

2 1/2" Bolt (56)–4

ASSEMBLY

2 3/4" Bolt (47)–4
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
4" Bolt (120)–2
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys
adjustable wrench
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to
one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do
not use power tools for assembly.
M4 x 19mm Tek
Screw (26)–6
M5 Star
Washer (7)–2
M8 Star
Washer (5)–6
M10 Star
Washer (9)–6
1. Make sure that the power cord is unplugged.
Have a second person hold the Base (52) in the
position shown.
Attach six Base Pads (63) to the Base (52) with
six M4 x 19mm Tek Screws (26).
and your own Phillips screwdriver
, and needlenose pliers
M5 x 16mm M4.2 x 19mm
Screw (85)–2 Screw (10)–6
M10 Jam Nut (16)–4
M10 Washer
(14)–2
M6 Nut (43)–4
M6 Washer
(32)–4
Star Washer (81)–4
.
1/2" Ground Screw
(84)–1
M6 x 58mm Bolt (13)–4
M10 x 58mm Bolt (2)–4
M10 x 60mm Patch Bolt (1)–2
1
26
63
52
Wheel Housing Bolt (13)–4
6
Washer (29)–4
Handrail Washer (11)–
,
M8 x 15mm Bolt
(8)–6
26
63
26
63
26
63
26
63