Touch Panel - Brother PE770 Service Manual

Test Mode
[Adjustment standard]
Touch the 5 point in order from 1 to 5, and then "SUCCESS" is displayed.
[Adjustment procedure]
1. Turn the power on while pressing the
and (Thread cutter button).
2. Touch the point "x" in order from 1 to 5.
*Key point
• Adjustment finishes when "SUCCESS" is displayed after pressing "5".
• Adjust again when "ERROR" is displayed after pressing "5".
*Note
• Use included touch pen.
Do not use acute hard tip one, otherwise touch panel will be damaged.
3. Turn the power off and on again. Check touch panel work correctly.

Touch panel

(Start/Stop button),
Touch panel position adjustment screen
(Needle position button),
4 - 5