Front Cover Assembly (Spool Pin Attachment) - Brother PE770 Service Manual

Main unit
5

Front cover assembly (spool pin attachment)

1. Attach the spool pin 1 to the spool pin holder assembly 2.
2. Attach the thread bobbin cover 3 and the spool pin holder assembly 2
with the screws 1 and 2.
*Key point
• Secure both the spool pin holder assembly 2 and the thread
bobbin cover 3 with the screw 1.
1
2
6
Front cover assembly
(assembling bobbin winder guide assembly)
1. Attach the bobbin winder guide assembly 1 to the front cover.
2. Hand start the screw 1.
(Fully tighten after 4 - 16 "Bobbin winder.")
1
7
Indication panel attachment
1. Attach the indication panel 1 to the front cover.
*Key point
• Insert the indication panel 1 from the top of the front cover to
set it on the front side of the front cover, and then attach the 4
hooks 2 to the inside of the front cover.
3 - 32
Main parts
Taptite, Cup B
M3X10
Taptite, Bind B
M3X8
Screw, Pan (S/P washer)
M3X8DA
2
2
Torque
0.29 — 0.49 N·m
Torque
0.29 — 0.49 N·m
1
Torque
0.57 — 0.78 N·m
1
1
3
1
1
1 2
2
2