Assembling The Thread Cutter Lever Assy - Brother PE770 Service Manual

Modules
3

Assembling the thread cutter lever assy

1. Attach the thread cutter lever gear 1 to the thread cutter lever 2 using the
screw 1.
1
4
Thread cutter lever assy. attachment
1. Apply a small amount of EPNOC AP(N)0 to the thread cutter lever shaft.
2. Attach the thread cutter lever assy 1 to the thread cutter lever shaft.
*Key point
• Align the thread cutter lever assy 1 match mark 2 with the
idle gear assy 4 match mark 3.
Apply a small amount of EPNOC AP(N)0 to the thread
cutter lever shaft.
5
Rubber and spacer attachment
1. Attach the rubber 1 to the thread cutter frame 2 shaft, and attach
retaining ring E2.
2. Attach the spacer 3 to the thread cutter frame 2.
Thread cutter module
Screw, Pan (S/P washer)
M3X6DA
0.78 — 1.18 N·m
Small amount
Torque
1
1
XC8387***
2
3
2
1
3
2 4
Retaining ring E2
1
3 - 61