Using The Unit - Stihl FT 250 Instruction Manual

Hide thumbs Also See for FT 250:
Table of Contents

Advertisement

WARNING
To reduce the risk of blade damage,
avoid contact with stones and the
ground. Resharpen the blade properly in
good time – dull teeth may result in the
blade cracking and shattering and
causing serious injury.
Risk of kickout
The risk of kickout is highest in the black
area of the blade: Do not use this area of
the circular saw blade for cutting.
There is also a risk of kickout when
using the lighter shaded areas of the
blade: These areas of the blade should
only be used by experienced operators
with specialized training.
STIHL recommends that you use the
non-shaded area of the circular saw
blade. Always start the cut with this area
of the blade.
FT 250

Using the Unit

Use your tea plant pruner only for cutting
and pruning tea bushes.
Preparations
To reduce the risk of accidents or
N
injury, remove all obstacles and
objects from the work area.
Before starting cutting work, scare
N
away small animals to ensure they
are not injured.
Put on the harness – see "Fitting the
N
Harness".
Start the engine – see
N
"Starting / Stopping the Engine".
Put on the harness with machine –
N
see "Fitting the Harness".
WARNING
Do not operate your tea plant pruner
without the harness.
Swing the tea plant pruner to and fro
N
at the same height while moving
forwards.
English
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents