Table of Contents
Advertisement
English
Using the Unit
Your power edger is designed to
produce sharp contoured borders
around lawns and flower beds. It will cut
almost all types of grass, weeds and soft
green plants.
Preparations
If the work area is very dry, spray it
lightly with water: this softens the soil
and ensures that less dust is created.
Slightly damp green plants are easier to
cut.
WARNING
Clear away all obstacles and solid
objects from the work area.
12
Plan the best route for edging.
N
Always hold and operate your edger
on the right-hand side of your body.
Adjusting Depth of Cut
2
1
A
To reduce the risk of injury, shut off
N
the engine.
Loosen the wingnut (1)
N
counterclockwise.
Push wheel (2) upwards to increase
N
the depth of cut (A) or downwards to
reduce the depth of cut (A).
Adjust correctly
3
B
The depth of cut depends on the
unevenness of the ground, your height
and the way you hold the edger. Use the
following procedure:
Adjust the depth wheel (2) so that
N
the blade (3) just touches the
ground or breaks the surface of the
soil by no more than 5 mm (0.2 in).
FC 95, FC 110
2
Advertisement
Table of Contents
