Alpine X209D Quick Reference Manual page 230

Maneuver restrictions and one-way streets are taken into account when planning a
route.
Roads are used only if access for taxis is allowed.
Private roads, resident-only roads and walkways are excluded from routes.
Maneuver restrictions and one-way streets are taken into account when planning a
route.
Roads are used only if access for trucks is allowed.
Private roads, resident-only roads and walkways are excluded from routes.
U-turns are excluded from routes (turning back on a divided road is not considered
as a U-turn).
If the map contains data on dimension, weight and freight restrictions, they can also
be taken into account when planning a route.
Creating a profile makes it possible to set up vehicle parameters used in route planning. You can have
several profiles for the same vehicle.
To add a new vehicle profile, perform the following steps:
1. Tap
2. Select the vehicle type and set the parameters below. Depending on the vehicle type, some
parameters may not be available in the list.
You can set the following parameters:
Button
Rename the profile for something meaningful, for example John's car.
Set the maximum speed you travel at.
Enter the average consumption of your vehicle in built-up areas. The unit for
consumption can be set in Regional settings.
Enter the average consumption of your vehicle on highways. The unit for
consumption can be set in Regional settings.
Select the engine and fuel type of your vehicle. It helps estimate the CO
To reset all vehicle profiles to their default settings, tap
.
, browse the list of vehicles, and tap
71
Function
,
.
emission.
2
, and