Alpine X209D Quick Reference Manual page 229

4.3.1 Route preferences
The following settings determine how routes are calculated:
Button
Set the type of vehicle you want to use to navigate the route. Based on this setting,
some of the road types can be excluded from the route, or some of the restrictions
may not be taken into account in route calculation. See page 70.
Edit the parameters of the vehicle profile. See page 70.
Optimize the route calculation for different situations and vehicle types by changing
the planning method. See page 72.
Select on-road or off-road navigation. See page 57.
Select your preferred road types for the route. See page 72.
4.3.1.1 Vehicle profile
You can select the following vehicle types:
Button
Maneuver restrictions and directional constraints are taken into account when
planning a route.
Roads are used only if access for cars is allowed.
Private roads and resident-only roads are used only if they are inevitable to reach
the destination.
Walkways are excluded from routes.
All maneuvers are available in intersections.
One-way streets are taken into account so that driving in the opposite direction is
allowed at low speed.
A private road is used only if the destination is there.
Walkways are excluded from routes.
Maneuver restrictions and one-way streets are taken into account when planning a
route.
Roads are used only if access for buses is allowed.
Private roads, resident-only roads and walkways are excluded from routes.
Function
Description
70