Alpine X209D Quick Reference Manual page 199

3.1.6 Entering coordinates
To select a destination by entering its coordinates, perform the following steps:
1. Press the navigation hardkey button to access the Navigation menu.
2. Tap .
3. You can enter the latitude and longitude values in any of the following formats: decimal degrees,
degrees and decimal minutes, or degrees, minutes and decimal seconds. Tap
.
(optional) If necessary, tap
coordinate in UTM format.
Tip!
4. The route is calculated and the map appears showing the entire route, where you can check route
information and route alternatives. Tap
to start your journey.
then
to modify the route parameters, or tap
40
and enter the