Alpine X209D Quick Reference Manual page 206

3.4.1 Setting a new starting point
For normal navigation, all routes are calculated from the current position. You can pause navigation to
check future routes, simulate them or see their length in time and distance. Then you can set the starting
point of the route to a location other than the current GPS position.
1. Press the navigation hardkey button to access the Navigation menu.
2. In the Navigation menu, tap
3. The first line from the bottom is the start of the route, normally the current GPS position. Tap
4. The Change Start to... screen appears. Select the starting point of the route the same way you
select a destination.
5. The Multipoint Route screen appears where you can continue adding a destination to your route.
.
, select , and confirm your action at the warning message.
47