System settings
Sound settings
You can adjust the sound and volume of the fv1fv11
individually. The settings depend on the equip
ment fitted in your vehicle.
Fig. 174
Adjusting balance/fader
.- Se le ct : !M EN U! button>
Entertainment.
button >
Treble/Bass
You can adjust the settings for
by turning the rotary push button. Any changes to
the settings only apply to the audio source cur
rently active. This allows you to set the sound for
each audio source separately.
Balance/fader (sound focus)
To set the left/right volume ratio:
-
rotary pushbutton. Turn the rotary pushbutton
clockwise or anti-clockwise to the desired posi
tion.
To set the front/rear volume ratio:
-
rotary pushbutton again. Turn the rotary push
button clockwise or anti-clockwise to the de
sired position.
To set the volume ratio using MMI touch:
-
Move your finger in the desired direction on the
MMI touch pad.
Speed dependent volume control
You can adjust the automatic volume adaption to
the interior noise level by turning the rotary
pushbutton.
206
Sound>
left control
Treble
Bass
and
Press the
Press the
Volume settings
Adjusting the volume
Using the ON/OFF button, you can adjust the vol
ume of an audio source or system message (e.g.
during a speech dialogue) directly while it is be
ing played.
-Volume up/down:
Turn the ON/OFF
qpage 115, Fig. 115 clockwise or anti-clock
wise.
Mute/pause:
-
Briefly press the ON/OFF button.
Or:
Turn the ON/OFF button anti-clockwise un
til the mute symbol appears. Any active audio/
video source will then be paused .
Unmute/resume:
-
Briefly press the ON/OFF but
Or:
ton.
Turn the ON/OFF button clockwise.
CO)
Note
When you switch on the MMI system, very
high/very low volume levels are automatically
reduced/increased to a preset level.
Adjusting the system volume
.- Select: !MENU! button>
button.
Telephone
Mute telephone:
Message and ring tones are si
lenced.
Ring tone:
Refer to q page 144,
volume settings.
Ring tone volume:
Turn the rotary push button to
adjust the volume of the ring tone selected.
Message volume:
Turn the rotary pushbutton to
adjust the volume of the tone indicating receipt
of a text message.
Microphone input level:
ton to adjust the volume of a telephone call while
you are on the phone.
Navigation
Voice guidance:
Refer to q page 164, Voice guid-
ance.
button@
Sound>
left control
Ring tone and
Turn the rotary pushbut
�