Audi TTS Coupe 2015 Owner's Manual page 149

... Select and confirm OK.
... To allow the MMI to connect automatically in
the future, select and confirm
... To establish an Internet connection for Audi
connect services, confirm the prompt on the
Accept.
display with
After connecting successfully
After connecting successfully, one or two sym­
bols (depending on the connection type) will ap­
pear in the status line of the infotainment display
to indicate the signal
qpage 121, Fig. 126.
You can now use Audi connect.
... Select: I button>
MENU!
... Confirm the system query of whether an Inter­
net connection should be established with
always connect if necessary.
Removing SIM card
.., Briefly press the SIM card. The card will then
eject from the slot. Remove the SIM card.
CD
CAUTION
- To avoid damaging the SIM card reader, on­
ly use mini SIM cards (25 mm x 15 mm)
q Fig. 139.
Please contact your service pro­
vider for more information on mini SIM
cards.
- Should you have inserted a different SIM
card size in the SIM card reader, do not un­
der any circumstances attempt to remove it
yourself as this may damage the SIM card
reader. Please contact a qualified workshop.
- If you use SIM card adapters, the vibrations
caused by the movement of the vehicle may
cause the SIM card to become detached
from the adapter - risk of damage to the
SIM card reader.
0
N
co
.....
1) Not available in all markets. Applies to mobile phones
\D
IJl
..... with Bluetooth remote SIM Access Profile on vehicles with
Audi connect* and Audi phone box* .
\D
.....
Yes.
strength@/@
Audi connect.
Connecting an rSAP enabled mobile phone
via Bluetooth
Applies to: vehicles with Audi connect
Fig. 140 ls your mobile phone rSAP enabled? This QR code
takes you directly to the mobile device database (data con­
nection costs vary according to your mobile phone con­
tract)
Important
Yes,
Your mobile phone must support the Bluetooth
remote SIM Access Profile (Bluetooth rSAP).
For information regarding which Bluetooth con­
nections and functions your mobile phone sup­
ports, contact your mobile network service pro­
vider or consult the mobile device database at
www.audi.com/bluetooth
The vehicle must be stationary, and the ignition
must be switched on.
The Bluetooth function and the discoverability
option of the MMI system and the mobile phone
must be activated.
The mobile phone you would like to connect must
not be connected actively to any other Bluetooth
device. The MMI must not be connected to a mo­
bile phone.
Access to your SIM card (SIM Access) must be ac­
tivated on your mobile phone. 1 )
Connecting a mobile phone
I
... Select:
MENU
mobile phone
show the Bluetooth devices available. Or:
Audi connect
q Fig. 140.
I
>Telephone> Connect
button
Continue.
> The display will
....
M
... .
N
<{
a:
..,.
147