Hotspot settings
The Wi-Fi connection between your vehicle and
the Wi-Fi device (laptop or mobile phone) is en
crypted. Before a connection can be established,
you must enter the following values/settings
when setting up your Wi-Fi device (these values
can be edited as required):
-Access point (SSID): Name of the Wi-Fi net
work.
Password:
-
A random MMI password is set at
the factory. This password can be changed. The
encryption type WPA2 requires the password to
be at least 8 characters long. Please select a se
cure password.
Discoverability: To switch the discoverability of
-
your Wi-Fi network on or off.
Network search*
A list of the Wi-Fi networks available near you is
displayed.
A
WARNING
- Do not allow the features of the Wi-Fi hot
spot to distract you from watching the traf
fic - taking your eyes off the road can cause
an accident.
- Laptop computers and similar devices can
only be operated safely when the vehicle is
stationary because of their weight; any
loose objects can be catapulted through the
vehicle in an accident and cause serious inju
ries. Always make sure that such devices are
securely stowed while you are driving.
- No Wi-Fi devices may be used from the front
seats in the areas around the airbags while
the vehicle is being driven. Please also ob
serve the safety warnings in the chapter on
page 229, Important safety notes on the
c:::>
front airbag system.
CD
CAUTION
Please note that it is your responsibility to
take precautions regarding data protection,
anti-virus protection and protection against
0
N
loss of data on mobile devices used to con
co
.....
nect to the Internet via the Wi-Fi hotspot .
\D
IJl
.....
\D
.....
(!j)
Note
- You might require a separate mobile phone
contract with extra costs before you can use
the Wi-Fi hotspot. For more information,
contact your service provider.
- Depending on your mobile phone tariff, you
may be charged for receiving data packets
online via the Wi-Fi hotspot, especially if
you are using the system abroad. We
strongly recommend that you use a data
flat rate. For more information, contact
your service provider.
- For more information on Audi connect serv
ices, visit www.audi.com/connect.
Configuring the data
connection
Applies to: vehicles with Audi connect
You must configure a data connection before you
can use Audi connect services.
... Se le c t : IM EN UI button> right control button>
Connection manager.
... Select: right control button>
Data connection settings.
You can select when you would like the system to
establish an Internet connection in the
nection settings menu. The online connection is
ended automatically when a requested Audi con
nect service no longer requires any further data.
The following options are available:
Connection setup
if requested: A data connection will only be es
-
tablished on request.
-
no request: A data connection will be establish
ed automatically for the use of Audi connect
services.
-
never: A data connection will not be establish
ed. It is then not possible to call up Audi con
nect services.
When a data connection has been established, a
symbol indicating the active data connection and
the signal
strength®/©
appears in the status line of the infotainment
display.
Audi connect
Online settings>
Data con
page 121, Fig. 126
c:::>
153
.,..