Other Settings - Audi TTS Coupe 2015 Owner's Manual

- To import contacts from your myAudi ac­
count 1 ): Select and confirm Import contacts>
myAudi account. Enter your myAudi user data.
You must have a myAudi account before you can
import contacts from the myAudi account. You
only have to enter your myAudi user data/my Audi
PIN once. When you store a vehicle in your myAu­
di account, you will receive the myAudi PIN in the
account.
CD)
Note
- Please also observe the notes on Audi con­
nect� page 154.
- For more information on the myAudi ac­
count, please see www.audi.com/myaudi.
- The imported contacts are stored in the lo­
cal memory of the directory you are using.
- You can import up to 1000 contacts. You
can call up the memory capacity of the di­
rectory any time � page 144.
- Never store important data on SD cards or
USB mass storage devices. Audi shall not ac­
cept any liability whatsoever for the loss of
data or media.
- It is not possible to export contacts which
have been downloaded from a mobile
phone.

Other settings

Telephone settings
Applies to: vehicles with telephone
I I
.,. Select: MENU button >Telephone> right con-
trol button > Telephone settings.
Call options*
Call forward: Forwarding incoming calls to your
mailbox or to another phone number can be acti­
vated/deactivated. You can use Check status to
check whether this function is activated or deacti­
vated.
0
N
l) The conditions for using Audi connect services* must be
co
.....
met and you must have created an account at
\D
IJl
..... www.audi.com/myaudi, added a vehicle to the account
and stored contacts .
\D
.....
Call waiting:If this option is activated�, you will
be informed of incoming calls when you are on
the phone. You can use Check status to check
whether this function is activated or deactivated.
Transmit caller ID: Sending your telephone num­
ber in outgoing calls can be activated/deactiva­
ted. With the Network-dependent option, the
setting agreed in your mobile network service
contract will be used. The settings apply only to
the Telephone menu in the MMI system. When
the Bluetooth connection has been terminated,
the settings of your mobile phone apply. You can
use Check status to check whether this function
is activated or deactivated.
Bluetooth settings
Refer to � page 204, Bluetooth settings.
Data connection settings*
Refer to� page 153, Configuring the data con­
nection.
Telephone mode*
On vehicles with a car telephone kit, you can
choose between three different telephone modes
to optimise the network response:
-Automatic: The car telephone automatically
switches between the GSM (2G), UMTS (3G)
and L TE networks. This depends on the net­
work, the network reception, and the position
of the vehicle. In this mode, there might be re­
strictions when using Google Earth or Wi-Fi.
- Telephony optimised: The car telephone kit
registers with the GSM network (2G). In this
mode, the reception is prioritised for making
and receiving calls. There may be restrictions
when using Google Earth or Wi-Fi.
- Data service optimised: The car telephone reg­
isters with the GSM (2G), UMTS (3G) or LTE net­
work. This depends on the network, the net­
work reception, and the position of the vehicle.
In this mode, the reception is prioritised for the
Telephone
.,..
143