Trunk Support — Fixed Arm - Invacare Rea Clematis User Manual

The holder for the "swing-away" trunk support is
placed in the attachment A on the backrest
1. Loosen the knob B.
2. Place the trunk support holder C.
3. Re-tighten the knob.
Tools: 5 mm Allen key / 13 mm fixed spanner.
1. The angle can be adjusted by loosening the screws E
and bolts D on the trunk support arm.
2. Hold with the Allen key and tighten with the fixed
spanner.
3. Remember to re-tighten the screws and bolts when the
required position is achieved.
The "swing-away" trunk support can be turned
sidewards in order to be out of the way when the
user is moving in to or out of the wheelchair.
CAUTION!
Risk of pinching
– The cover on the trunk support arm must
always be on when the chair is in use.
5.6 Trunk support — fixed arm
Height adjustment
B
A
1439960-D
1. You adjust the height by first loosening the screw/screws
A.
2. Move the attachment B upwards or downwards to the
desired position.
3. Re-tighten the screw/screws.
Tools: 5 mm Allen key
Sideways adjustment
1. Loosen the knob D.
2. Move the trunk support C sideways to the required
position.
3. Re-tighten the knob D.
Depth adjustment — fixed cushion
1. Loosen the screws E.
2. Move the trunk support forwards or backwards to the
desired position.
3. Re-tighten the screws.
Tools: 5 mm Allen key
5.7 Lateral positioning pads (for adjustable
backrest cover only)
WARNING!
Risk of trapping
– Be careful not to trap your trunk between the
two lateral positioning pads during front or
lateral transfers; when the user is moving in
the wheelchair.
Accessories
17