Accessories - Invacare Rea Clematis User Manual

5 Accessories

5.1 Adjusting the drip stand
The rod of the drip stand must always be placed in
a vertical position, i.e in a 90 degree angle to the
ground, no matter the position of the backrest or
the wheelchair.
90°
Height
A
1. Loosen the lever A.
2. Adjust the drip stand to the desired height.
3. Re-tighten the lever A.
Angle
A
1. Loosen the lever A.
2. Adjust to the desired angle.
3. Re-tighten the lever A.
1439960-D
90°
5.2 Adjusting the pommel
A
B
1. Loosen the handwheel B.
2. Adjust the pommel A to the desired height.
3. Re-tighten the handwheel B.
5.3 Half tray
WARNING!
Risk of falling / injury
– The half tray must never be used as a
replacement for the posture belt.
WARNING!
Risk of tipping / injury
– Max load on the tip of the widest part of the
half tray: 1.5 kg
CAUTION!
Risk of discomfort / minor bruises
– Make sure that the elbow of the user is placed
on the half tray when propelling the wheelchair.
If the elbow protrudes from the wheelchair
while propelling the wheelchair, there is a risk
of discomfort or minor bruises.
CAUTION!
Risk of pinching fingers
There is a mechanism below the half tray where
you could trap your fingers.
– Be careful when adjusting the tray or when
using the swing-away function.
CAUTION!
Risk of pinching or minor cuts
– Do not transfer from the wheelchair when the
half tray is in horizontal position.
The half tray can be adjusted in width and swung
away.
5.3.1 Mounting the half tray
Mounting the half tray
B
Accessories
A
15