Adjusting The Half Tray - Invacare Rea Clematis User Manual

Rea® Clematis®
1. Insert the tube of the half tray A into the attachment
B under the arm pad.
2. Push on the push pin C and insert the ring D on the
tube A.
3. Release the push pin C.

5.3.2 Adjusting the half tray

A
1. Slide the half tray A forwards or backwards to adjust to
the required depth.
CAUTION!
Risk of discomfort
– When adjusting the depth of the half tray,
make sure not to squeeze the stomach of
the user.
5.3.3 Add a half tray cushion
A cushion for the half tray can be placed on the half tray in
order to have a softer surface for the arms and elbows.
A
1. Place the cushion for the half tray A on the tray.
2. Place the attachment straps B into the plastic buckle
and around the half tray A.
16
B
5.4 Headrest / Neckrest
5.4.1 Height adjustment
B
A
The height and the removal are operated by the
handwheel. The bar is equipped with an adjustable
stop block.
1. Loosen the screw in the stop block B.
2. Loosen the handwheel A.
3. Adjust the head rest to the desired position.
4. Re-tighten the handwheel A.
5. Slide the stop block B down to the top of the headrest
attachment.
6. Re-tighten the screw.
It is now possible to remove the headrest and
reinsert it in the desired position without further
adjustments.
5.4.2 Depth / angle adjustment
1. Loosen the handle D.
2. Loosen the screws C.
3. Adjust the depth and angle of the headrest.
4. Re-tighten the handle and the screws.
5.5 Trunk support "swing-away"
B
B
A
A C
1439960-D