Brake Fluid Level - Lexus IS 350C 2014 Pds Manual

D. UNDER THE HOOD (Continued)
D01
D02
Add Oil
D03
D04
IS3D025
O.K. Too Full
IS3D003
O.K.
Add Fluid
IS3D004
IS3D022
D01. ENGINE HOOD RELEASE LEVER
Check that the opening and closing of
the hood is smooth and that the latch
operates properly using the hood release
lever.
D02. ENGINE OIL LEVEL
(ENGINE NOT RUNNING)
a) Remove the engine oil dipstick and
wipe it clean. Reinsert the dipstick and
pull it out to check the oil level. The
level should be between the two
marks.
b) Check for dirt or impurities in the oil.
Note: If the oil level is too low, add spe-
cified engine oil and check for oil leaks.
D03. BRAKE FLUID LEVEL
Visually check the fluid level through the
reservoir. If low, replenish the brake fluid
reservoir with FMVSS No.116 DOT 3 or
SAE J1703 brake fluid and check for
fluid leaks.
Brake fluid level should be the "MAX"
line (within 0.2 in. [5 mm] below).
Note: Refer to the Repair Manual for
fluid specifications.
D04. ENGINE COOLANT LEVEL
Visually check the coolant level through
the coolant reservoir tank when the en-
gine is cool. The coolant level is suitable
if the level is between the "FULL" and
"LOW" lines on the tank.
CAUTION:
To prevent burning yourself, do not re-
move the radiator cap when the engine
is hot.
54
Lexus PDS