Table of Contents
Advertisement
D. UNDER HOOD (Continued)
D01
D02
Add Oil
OK
D03
D04
D01. ENGINE HOOD RELEASE LEVER
PD0188
D02. ENGINE OIL LEVEL
Too Full
PD0189
D03. BRAKE FLUID LEVEL
OK
Add
Fluid
PD0190
D04. HYBRID SYSTEM INVERTER AND
PD0426
Check that the opening and closing of the
hood is smooth and that the latch operates
properly using the hood release lever.
(HYBRID SYSTEM NOT RUNNING)
a) Remove the engine oil dipstick and
wipe it clean. Reinsert the dipstick and
pull it out to check the oil level. The level
should be between the two marks.
b) Check for dirt or impurities in the oil.
HINT:
If the oil level is too low, add specified
engine oil and check for oil leaks.
Visually check the fluid level through the
reservoir. If low, replenish the brake fluid
reservoir with FMVSS No. 116 DOT 3 or
SAE J1703 brake fluid and check for fluid
leaks.
Brake fluid level should be the "MAX" line
(within 5 mm (0.2 in.) below).
HINT:
Refer to the Repair Manual for fluid
specifications.
ENGINE COOLANT LEVEL
Visually check the coolant level through
the coolant reservoir tank when the hybrid
system is cool. The coolant level is suitable
if the level is between the "FULL" and
"LOW" lines on the tank.
CAUTION:
To
prevent
burning
remove the radiator cap when the hybrid
system is hot.
51
yourself,
do
not
Lexus PDS
Advertisement
Table of Contents
