Brake Fluid Level - Lexus LS 460 Supplementary Manual

D. UNDER THE HOOD (Continued)
D01
D02
Add Oil O.K.
D03
D04
D01. ENGINE HOOD RELEASE
D02. ENGINE OIL LEVEL
Too Full
D03. BRAKE FLUID LEVEL
LS10070
D04. ENGINE COOLANT LEVEL
LS10035
64
LEVER
Check that the opening and closing
of the hood is smooth and that the
latch operates properly using the
hood release lever.
(ENGINE NOT RUNNING)
a) Remove the engine oil dipstick
and wipe it clean. Reinsert the
dipstick and pull it out to check
the oil level. The level should be
between the two marks.
b) Check for dirt or impurities in the
oil.
Note: If the oil level is too low, add
specified engine oil and check for
oil leaks.
Visually check the
through the reservoir. If low, replen-
ish the brake fluid reservoir with
FMVSS No.116 DOT
J1703 brake fluid and check for
fluid leaks.
Brake fluid level
"MAX" line (within 0.2 in. [5 mm]
below).
Note: Refer to the Repair Manual
for fluid specifications.
Visually check the
through the coolant reservoir tank
when the engine is cool. The cool-
ant level is suitable if the level is
between the "FULL"
lines on the tank.
CAUTION:
To prevent burning yourself, do not
remove the radiator cap when the
engine is hot.
2007MY LS460L/LS460
fluid level
3 or SAE
should be the
coolant level
and "LOW"