Cisco Catalyst 2960-X Command Reference Manual page 62

show etherchannel
Port state
Channel group = 1
Port-channel
Port index
Flags: S - Device is sending Slow LACPDUs
Local information:
Port
Gi1/0/1
Gi1/0/2
Age of the port in the current state: 01d:20h:06m:04s
Port-channel: Po1
Age of the Port-channel = 01d:20h:20m:26s
Logical slot/port = 10/1
HotStandBy port
Port state
Protocol
Ports in the Port-channel:
Index
------+------+------+------------------+-----------
0
0
Time since last port bundled:
This is an example of output from the show etherchannel channel-group-number summary command:
Switch> show etherchannel 1 summary
Flags: D - down P - in port-channel
Number of channel-groups in use: 1
Number of aggregators: 1
Group
------+-------------+-----------+----------------------------------------
1
This is an example of output from the show etherchannel channel-group-number port-channel command:
Switch> show etherchannel 1 port-channel
Port-channels in the group:
----------------------
Port-channel: Po1 (Primary Aggregator)
------------
Age of the Port-channel = 01d:20h:24m:50s
Logical slot/port = 10/1 Number of ports = 2
Logical slot/port = 10/1 Number of ports = 2
Port state = Port-channel Ag-Inuse
Protocol = LACP
Ports in the Port-channel:
Index
------+------+------+------------------+-----------
0
0
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
56
= Up Mstr In-Bndl
Mode
= Po1GC = -
= 0Load = 0x00
A - Device is in active mode.
LACP port
Flags State Priority
SA bndl 32768
A bndl 32768
Port-channels in the group:
----------------------
(Primary Aggregator)
= null
= Port-channel Ag-Inuse
= LACP
Load Port EC state
00 Gi1/0/1 Active
00 Gi1/0/2 Active
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
u - unsuitable for bundling
U - in use f - failed to allocate aggregator
d - default port
Port-channel Protocol
Po1(SU) LACP
Load Port EC state
00 Gi1/0/1 Active
00 Gi1/0/2 Active
= Active Gcchange = -
Pseudo port-channel = Po1
Protocol = LACP
F - Device is sending fast LACPDU
P - Device is in passive mode.
Admin Oper Port
Key Key Number State
0x1 0x1 0x101
0x0 0x1 0x0
Number of ports = 2
No of bits
0
0
01d:20h:24m:44s Gi1/0/2
Ports
Gi1/0/1(P) Gi1/0/2(P)
No of bits
0
0
Layer 2 Commands
Port
0x3D
0x3D
OL-29043 -01