Cisco Catalyst 2960-X Command Reference Manual page 71

Layer 2 Commands
Channel group 1
Port
Gi1/0/1
Gi1/0/2
<output truncated>
This is an example of output from the show pagp 1 internal command:
Switch> show pagp 1 internal
Flags:
Timers: H - Hello timer is running.
Channel group 1
Port
Gi1/0/1
Gi1/0/2
This is an example of output from the show pagp 1 neighbor command:
Switch> show pagp 1 neighbor
Flags:
Channel group 1 neighbors
Port
Gi1/0/1
Gi1/0/2
Related Commands
Command
clear pagp
debug pagp
OL-29043 -01
Dual-Active Partner
Detect Capable Name
No Switch
No Switch
S - Device is sending Slow hello.
A - Device is in Auto mode.
S - Switching timer is running.
Flags State Timers
SC U6/S7 H
SC U6/S7 H
S - Device is sending Slow hello.
A - Device is in Auto mode.
Partner
Name
switch-p2
switch-p2
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
Partner
Port
Gi3/0/3
Gi3/0/4
C - Device is in Consistent state.
Q - Quit timer is running.
I - Interface timer is running.
Hello Partner PAgP
Interval Count Priority
30s 1 128
30s 1 128
C - Device is in Consistent state.
P - Device learns on physical port.
Partner Partner
Device ID Port
0002.4b29.4600 Gi01//1
0002.4b29.4600 Gi1/0/2
Description
Clears PAgP channel-group information.
Enables debugging of PAgP.
show pagp
Partner
Version
N/A
N/A
Learning Group
Method Ifindex
Any 16
Any 16
Partner Group
Age Flags Cap.
9s SC 10001
24s SC 10001
65