show platform spanning-tree
show platform spanning-tree
To display platform-dependent spanning-tree information, use the show platform spanning-tree privileged
EXEC command.
show platform spanning-tree synchronization [detail | vlan vlan-id]
Syntax Description
synchronization
detail
vlan vlan-id]
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS 15.0(2)EX
Usage Guidelines
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks you
to do so.
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
70
Displays spanning-tree state synchronization information.
(Optional) Displays detailed spanning-tree information.
(Optional) Displays VLAN switch spanning-tree information for the specified
VLAN. The range is 1 to 4094.
Modification
This command was introduced.
Layer 2 Commands
OL-29043 -01