FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
5.1.3
Setting AT command for unregistered modem
Only when "MODEM initialized" is set to "User register mode," "User mode [8bits NP][CH1]," or "User mode
[8bits NP][CH2]," execute the following setting.
(The modem initialization setting depends on the setting contents of the [
[Parameter] - [PLC parameter]
when
1
Newly adding a device memory
Select "Device memory" in the project tree, right-click it to display the submenu, and select
"New...".
Click the [OK] button on the "New" dialog box.
2
Creating the MAIN data
Click the [Yes] button.
I-26
is selected in the project tree.)
5 How to Setup Modems on the PLC Side
5.1 Setting Using GX Developer
PLC system(1)
] tab displayed