FX Series PLC User's Manual - Data Communication Edition
Common Items
3.3
Communication Setting in Parameter Method (FXGP/WIN)
Communication settings may be changed by the parameter method with GX Developer and FXGP/WIN for
Windows. This section describes how to change parameters with FXGP/WIN.
Ch0 and Ch 2 cannot be set using FXGP/WIN.
3.3.1
Operating procedure
This subsection explains the serial communication setting method. Suppose that FXGP/WIN is already
started up.
1
Adjusting serial setting (parameter)
Select [Option] - [Serial setting (parameter)] from the toolbar.
The following dialog appears according to absence/presence of parameter settings.
1. When there are no parameter settings
There is no communication setting.
When using the programming communication, parallel link, N:N Network or remote maintenance, click the
[No] button.
When using computer link, inverter communication, or non-protocol communication (RS instruction) function,
click the [Yes] button.
A-58
3 Outline of Communication Setting in the FX Series
3.3 Communication Setting in Parameter Method (FXGP/WIN)