Setting Program For Slave Station (No. 1) - Mitsubishi FX3U-USB-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
N:N Network
8.1.5

Setting program for slave station (No. 1)

For the slave station setting program, refer to the program shown below.
The program shown below consists of three blocks, "parameter setting program," "error indication program"
and "operation program."
1. Parameter setting program
Make sure to start from step 0.
Parameter setting
M8038
0
2. Error indication program
Because slave station No. 1 does not recognize errors within itself (slave station No. 1), programs for errors
within itself are not required.
Data transfer sequence error in master station
M8183
Data transfer sequence error in slave station No. 2
M8185
Data transfer sequence ON
M8191
B-40
FNC 12
K 1 D8176
MOV
Station number settings: 1 (slave station No. 1)
Y000
Y002
Y003
8 Practical Program Examples
8.1 Practical Example 1 (Pattern 2)