Part Identification Chart - ProForm PFBE1416.0 User Manual

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part from the PART LIST on page 14. Note: Some small parts may have been preat-
tached. If a part is not in the parts bag, check to see if it has been preattached.
M10 Nylon
Locknut (23)
M6 Washer (25)
M10 Washer (24)
M10 x 95mm Bolt (10)
M10 x 90mm Bolt (26)
M10 x 70mm Screw (29)
M6 x 70mm Screw (28)
M10 x 65mm Screw (30)
M10 x 30mm
Screw (27)
5
M4 x 16mm
Self-tapping
Screw (8)