Description Of Weighing Step 5 - Empty - Siemens SIWAREX FTA Device Manual

Weighing Functions
AWI gravim. big bag emptying: continue with step 0
AWI catchw. emptying: continue with step 0
5.5.6

Description of weighing step 5 - Empty

If step 5 is blocked, then no activities in step 5 are performed. After enabling step
5, the empty signal is output. If emptying has finished, a check is performed to
determine whether a check stop requirement exists and if not, the switch to step 6
(only with totalising weighing - AWI) or to step 0.
5.5.7 Description of weighing step 6 - End control AWI
If step 6 is blocked, then no activities in step 6 are performed. After step 6 is enabled,
a check is performed to determine whether standstill 2 exists. If YES then the weight
recording and totalling are performed. A check is then performed to determine whether
a check stop requirement exists and if not, the switch to step 0 is made.
5.5.8 Description of Weighing Step 7
Weighing step 7 is currently not utilised (Reserve).
5.5.9 DR 4 - Monitoring time for Logging
If weighing result logging is activated with an instruction or automatically,
SIWAREX FTA monitors whether the procedure has been completed within the
defined amount of time. If not, an error is generated.
5.5.10 DR 4 - Device for log output
Logs can be output to a connected printer or to the Micro Memory Card (MMC).
The contents of the log are defined in data records DR 40 to DR 43.
5.5.11 DR 4 - Basis weight for the limit value 1
The limit values can be defined in reference to the gross weight or the net weight of
the scale. This way, a very coarse dosage (net reference) or a refilling of the scale
container (gross reference) can be defined for example.
5.5.12 DR 4 - Basis weight for the limit value 2
The limit values can be defined in reference to the gross weight or the net weight of
the scale. This way, a very coarse dosage (net reference) or a refilling of the scale
container (gross reference) can be defined for example.
5-70
SIWAREX FTA