Table of Contents
Advertisement
Description
3.1
Introduction
Milltronics WD600 Belt Scale
Milltronics WD600 belt scale is a low-to-medium capacity scale for light-to-medium belt loading.
It is designed to be inserted into either a flat roll idler (non-troughing) belt conveyor or a flat pan
slider belt conveyor for continuous weighing of dry bulk solids. WD600 is suitable for monitoring
such products as fertilizer, tobacco, animal feed pellets, and sugar.
WD600 belt scale consists of the following:
● weighbridge (slider deck)
● two precision load cells on mounting pads with weighbridge mounts
WD600 load cells output an electrical signal proportional to load, which is applied to the selected
Siemens belt scale integrator. Thus, weighing is accomplished without interrupting the process
and without affecting the process material.
Note
WD600 is an accurate and repeatable force sensor. Its performance is ultimately dependent
upon the conveyor system and the quality of the installation and accuracy of the alignment.
Milltronics WD600
Operating Instructions, 09/2016, A5E38964753_AB
3
9
Advertisement
Table of Contents
