Initialization - Epson Stylus SCAN 2000 Service Manual

EPSON Stylus Scan 2000

1.4.3 Initialization

PRINTER
There are three initialization methods.
1. Power-on (hardware) initialization
The printer initializes when turned on or when it recognizes the cold-reset command
(remote RS command).
When the printer initializes, the following actions are performed.
n
Initialize printer mechanism
n
Clear input data buffer
n
Clear print buffer
n
Set default values
2. Operator initialization
The printer initializes when turned on, or when the printer recognizes the -INIT signal
(negative pulse) from the parallel interface.
When the printer initializes, the following actions are performed.
n
Cap the printhead
n
Eject paper
n
Clear input data buffer
n
Clear print buffer
n
Set default values
3. Software initialization
The ESC@ command also initializes the printer.
When the printer initializes, the following actions are performed.
n
Clear print buffer
n
Set default values
Product Description
Opera Stand
Operation
ting by
Power on Valid Valid
Panel Reset Valid Valid
Initialize by
Valid Valid
command
STOP Valid -
CLEAR - Valid
Control Panel
Controller Scanner Printer
process process process
H/W H/W
initialization initialization
Set the local
Controller Panel
copy setting to
initialization initialization
default
S/W S/W
initialization initialization
Stop copying
Setting remains Cancel Eject paper
as is
• Setting mode:
default
• Copy mode:
Multi-copies
volume 1
Revision A
Restart
-
-
-
Copy
button
25