Printer Initialization; Hardware Initialization; Software Initialization - Epson LQ-1050 Technical Manual

1.7 PRINTER INITIALIZATION

There are two initialization methods: hardware initialization and software initialization.

1.7.1 Hardware Initialization

This type of initialization occurs when printer power is turned on or when the printer receives the INIT
signal from the host via the 8-bit parallel interface.
When printer is initialized in this way, it performs the following actions:
Initializes printer mechanism
Clears downloaded character set
Clears the input data buffer
Clears the image buffer
Sets printer selections to their default values

1.7.2 Software Initialization

This type of initialization occurs when the printer receives command
the printer is initialized in this way, it performes the
Clears the image buffer
Sets
printer selections to their default values.
NOTE: The printer's default values are as follows:
Page Position
Left and Right Margin
Line Spacing
Vertical Tab Position
Horizontal Tab Position
VFU Channel
Family Number of Type Style Roman (Family Number O)
Downloaded Characters
Justification
Character Per Inch
Bit Image Mode Assignment
Printing Effects
Preset paper position becomes top of form position
Released
1/6 inches
Cleared
Every 8 characters (relative)
Channel O
Deselected: Software initialize
Cleared: Hardware initialize
Left justification
10
K =
Z =
Cleared
1-21
actions:
L = =
via software.
2,