Epson Stylus SCAN 2000 Service Manual page 68

EPSON Stylus Scan 2000
Symptom Condition
The carriage moves, but
Printing is not performed.
no printing is performed.
Troubleshooting
Table 3-3. Repair of the Printer Mechanism (continued)
Cause Check Point
Head FFC is out of Check if the head FFC on the board or carriage
connection. is connected surely.
The FFC is disconnected
Check the FFC by using a tester.
inside.
I/C is defective. Install a new I/C and perform the self-test.
If the condition does not improve even after 2or
Head unit is defective. 3 times cleaning operation, replace the head
unit and perform the self-test.
Repair of the Printer Mechanism
Revision A
Solution
Connect the FFC properly.
Replace the FFC.
Replace I/C.
Replace the head unit.
67