Epson Stylus SCAN 2000 Service Manual page 27

EPSON Stylus Scan 2000
SCANNER
There are three initialization methods.
1. Hardware initialization
The scanner initializes when turned on.
When the scanner initializes, the following actions are performed.
n
Initialize scanner mechanism
n
Clear input/output data buffer
n
Set default values
2. Operator initialization
The scanner initializes when it recognizes the -INIT signal (negative pulse) from the
parallel interface.
When the scanner initializes, the following actions are performed.
n
Clear input/output data buffer
n
Set default values
3. Software initialization
The ESC@ command also initializes the scanner.
When the scanner initializes, the following actions are performed.
n
Clear input/output data buffer
n
Set default values
Product Description Control Panel
Revision A
26