NordicTrack NTEVEL19016.0 User Manual page 8

6. Identify the Left Pedal Arm (9). Insert the axle on
the Left Pedal Arm into the Left Leg (6).
Attach the Left Pedal Arm (9) with an
M8 x 14mm Shoulder Screw (112), an Outer
Pedal Cover (133), and a Pedal Arm Washer
(89).
Attach the Right Pedal Arm (132) to the Right
Leg (5) in the same way.
7. See the inset drawing. Loosen the indicated
M8 x 45mm Bolt (124).
Next, rotate the Right Upper Body Arm (7) into
the vertical position.
Secure the Right Upper Body Arm (7) to the
Right Leg (5) with an M8 x 45mm Bolt (124) and
an M8 Locknut (123).
IMPORTANT: See the inset drawing. Tighten the
indicated M8 x 45mm Bolt (124).
Tip: Avoid pinching the wires (not shown).
Slide the Right Leg Cover B (36) downward and
press it into place.
Repeat this step on the other side of the
elliptical.
6
5
132
9
89
6
7
123
124
8
133
112
Avoid pinching
the wires
124
7
36
5