Charging The Headset - BlueTrek MusiCALL User Manual

2. Charging the headset

The headset comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time.
When the headset is low power, red LED will flash twice and the headset
emits three "Dong" tones every 60 seconds.
the headset.
Using USB cable
Connect the USB cable to an computer USB port and the USB cable plug to
the charging jack of the headset. Red LED is on while charging. It takes
about 2 hours to charge the battery fully. When charging is completed, red
LED will be off.
Notes:
1) The battery is recycled.
2) Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat place, such as sunshine, fire or the like.
How to use
1. Turning on/off the headset
Function Operation
Turning on Press and hold
button for 3 seconds
until blue LED flashes
Turning off Press and hold
button for 6 seconds
until red LED flashes
Note: In order to save power, the headset will turn off automatically if no
devices can be connected within 10 minutes.
3
Please recharge the battery of
LED Indication
indicator tone
Blue LED A long "DI"
flashes three tone
times
Red LED is A long
on for 1 "DI" tone
second