Page 1
We, ModeLabs Technologies Ltd of 31/F China Online Centre, 333 Lockhart Road, Wan Chai, Hong Kong declare under our sole responsibility that our product BLUETREK SENSE to which this declaration refers is in conformity with the appropriate standards EN300 328-02 EN301 489-17 EN301 489-01...
Page 2
FCC/ Industry Canada Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. In compliance with Industry Canada regulations, technical specifications have been provided in a declaration of conformity.
Page 3
-You must charge it continuously for about 4 hours, until the red indicator light turns off. Please refer to the “Charging the BLUETREK® SENSE” section of this manual. -Pair the headset with a mobile phone. Please refer to the “Pairing the BLUETREK® SENSE” section of this manual.
Charging the BLUETREK® SENSE Please connect the charger to the headset and to the main. During the charge, the indicator light is red. The indicator light will turn off when the charge is complete. During subsequent charges, the charging should take approximately 3 hours.
Page 5
Pairing is the process of linking 2 Bluetooth® devices, so that they can communicate. To initiate pairing: Place the BLUETREK® SENSE and your mobile phone within 0.3 meter (1 foot) from each other. Switch on your phone and select its Bluetooth®...
Page 6
Once the mobile phone detects the headset, a “BLUETREK SENSE” message will be displayed. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000, then press “yes” or “ok” . BLUETREK SENSE BLUETREK SENSE For some phones, you may need to select “Connect”...
Page 7
Wearing the BLUETREK® SENSE Two different sizes of metal ear hooks are included in the pack to suit your ear size. To attach the ear hook, simply insert the ear hook ring to the back of the headset as shown in the diagrams.
Switching the BLUETREK® SENSE ON and OFF Switching BLUETREK® SENSE ON When your headset is off, press and hold the Main button for about 3 seconds until the blue indicator light is on. A beep (2 tones) can be heard in the speaker. Release the Main button.
This function may not be available on some phones, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. to find out more. Answering a call When the headset rings, press once on the TALK button to take the call.
In the Headset profile, you can simply turn off your headset. Transferring a call from the mobile phone to the BLUETREK® SENSE During an active call on the mobile phone, double click on the TALK button to transfer the call.
Page 11
4 different sizes of bud are included in the pack to suit your ear size. You can adjust the bud position that you feel the most comfortable. To replace the bud, remove the speaker cover by pulling gently out from the speaker. 9 I BLUETREK SENSE...
2) Press and hold the Main button for about 12 seconds until the indicator light flashes twice in red. 3) Press once again on the Main button and the indicator light will flash twice in blue. This indicates that the voice alert is activated. 4) Restart your headset. BLUETREK SENSE I 10...
The first thing you should do when encountering a problem that you cannot solve with this manual, is to switch off your headset and your mobile phone, and switch them on again. To find out more, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. 11 I BLUETREK SENSE...
- Turn off your headset before boarding an airplane. CAUTION : The built-in battery is non-replaceable. Do not attempt to replace it. Danger of explosion if battery is incorrectly replaced. Dispose of batteries according to local regulations. Do not dispose as household waste. BLUETREK SENSE I 12...
Page 15
Note on environmental protection: After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale.