Table of Contents
Advertisement
Notes:
After successful multi-pairing, the paired devices will remember each
other. Unless pairing information is deleted because of new pairing, they
will no need to pair next time. If the pairing information is deleted,
please make the cell phone and the headset set up hands free connection
first and then turn on the Bluetooth transmitter, multi-connecting can be
performed.
For the cell phone supporting the HSP and A2DP at the same time. It
may set up HSP and A2DP connection with the headset simultaneously.
At this time, the Bluetooth transmitter may not connect to the headset.
Clearing pairing list
The headset can remember 8 paired devices, when the number of paired
devices exceeds 8, the first one will be replaced. You can also clear pairing
list manually.
Function
Status of
Operation
headset
Clearing
Turned off or
Press and hold
pairing
any other
and + buttons for
list
status
about 8 seconds
Note: After clearing pairing list, the heasdset will enter pairing mode
automatically if it is turned on, and doesn't connect to last connected device
automatically.
3. Re-connecting with a Bluetooth device
1) Automatic connecting
Every time the headset is turned on, it will connect to last connected
device automatically.
2) Manual connecting to last connected device supporting HFP and
A2DP
When the headset is in standby mode and doesn't connect to a device
supporting HFP and A2DP, short press
last connected HFP device automatically.
6
Indication tone
Red LED is on
and there are
indication tones
button once, it will connect to
Advertisement
Table of Contents
