Pairing The Headset With A Bluetooth Transmitter - BlueTrek MusiCALL User Manual

Pairing the headset with a Bluetooth transmitter

You can connect the headset to a Bluetooth transmitter to enjoy music
wirelessly. Hereby take BTT010 (Bluetooth transmitter for iPod, not
included) for example. The pairing procedures are as follows:
1) Place the headset and the Bluetooth transmitter where they are easily
viewable by no more than 1 meter apart;
2) Enter the headset's pairing mode (Please refer to "How to enter pairing
mode);
3) Turn on the Bluetooth transmitter. It will search for Bluetooth devices
automatically and send a pairing request;
4) When the headset requests to enter a PIN No., the transmitter will
response "0000" automatically;
5) After successful pairing and connecting,
flash once every 5 seconds.
Notes:
The pairing password of the headset is "0000". So, the headset can only
pair with a Bluetooth transmitter whose pairing password is "0000".
If pairing still fails after several tries, please refer to the Bluetooth
transmitter's user's manual for further information.
Multi-pairing
The headset can connect with two devices at most. One is a Bluetooth cell
phone supporting HFP profile, the other one is a Bluetooth music device
supporting A2DP profile. If you want to finish the multi-pairing, please refer
to the following steps:
1) Firstly, pair the headset with a Bluetooth transmitter (refer to "pairing the
headset with a Bluetooth transmitter);
2) Turn off the Bluetooth transmitter;
3) Pair and connect the headset with a Bluetooth cell phone (refer to
"pairing the headset with a Bluetooth cell phone");
4) Turn on the Bluetooth transmitter, it will connect to the headset
automatically.
5
blue LED of the headset will