Indication Tone - BlueTrek MusiCALL User Manual

2) When the headset connected to a Bluetooth device
LED indicator
Red and blue LEDs flash
alternately
Blue LED flashes twice every 5
seconds
Blue LED flashes once every 5
seconds
Blue LED flashes once every 5
seconds
Blue LED flashes twice every 6
seconds
Blue LED flashes twice every 3
seconds
Blue LED flashes quickly
Blue LED is on for 2 seconds
every 8 seconds
Red LED flashes twice every 60
seconds

9. Indication tone

Indication tone
Emits 2 tones every 5 seconds
Emits 3 "Dong" tones every 60
seconds
Buzzer emits 2 "Hua" tones every
3 seconds
Care and maintenance
Read the following recommendations before using the headset. Following
these you will be able to enjoy the product for many years.
Do not expose the headset to liquid, moisture or humidity to avoid the
product's internal circuit being affected.
Don't use abrasive cleaning solvents to clean the headset.
Do not expose the headset to extremely high or low temperatures as this
will shorten the life of electronic devices, destroy the battery or distort
certain plastic parts.
10
Status of headset
Pairing mode
Standby mode (not connected
to a Bluetooth device)
Set up HFP or A2DP
connection
Set up HFP and A2DP
connection
Playing music
Incoming call
Calling
During a call
Low power
Status of headset
During a call (Microphone mute)
Low power
Incoming call