Table of Contents
Related Manuals for BlueTrek Metal
Summary of Contents for BlueTrek Metal
- Page 2 -You must charge it continuously for about 4 hours, until the red indicator light turns off. Please refer to the “Charging the BLUETREK METAL®” section of this manual. -Pair the headset with a mobile phone. Please refer to the “Pairing the BLUETREK METAL®” section of this manual.
- Page 3 Charging the BLUETREK METAL® Please insert the adapter in the main body. Then connect the USB connector to a powered USB slot. During the charge, the red Bluetooth indicator is switched on. The indicator light will turn off when the charge is complete.
- Page 4 • Do not charge your headset for more than 10 hours. • The use of any other charger will automatically suspend the warranty. It is strictly forbidden and can be very dangerous. 3 I BLUETREK METAL...
- Page 5 A beep (2 tones) can be heard in the speaker then release the TALK button. Pairing the BLUETREK® METAL Before using the BLUETREK® METAL headset, you must pair it with your Bluetooth® mobile phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can communicate.
- Page 6 And a sound can be heard in the speaker. Once the mobile phone detects the headset, a “BLUETREK METAL” message will be dis- played. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000, then press “yes”...
-
Page 7: Making A Call
This function may not be available on some phones, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. to find out more. Answering a call When the headset rings, press once on the TALK button to take the call. -
Page 8: Adjusting The Volume
To end the mute function When the microphone is muted, quickly press the VOL+ button once on the BLUETREK METAL. The periodic tone will end. Transferring a call from BLUETREK® METAL to the mobile phone With a phone in Headset Profile During an active call, to transfer it to the phone, simply turn off your headset. -
Page 9: Call Waiting
Transferring a call from the mobile phone to the BLUETREK® METAL With a phone in Headset Profile Switch on your headset. With a phone in Hands-Free Profile During an active call on the mobile phone, press the TALK button for about 2 seconds to transfer the call. - Page 10 Wearing the BLUETREK® METAL Two different sizes of ear hooks are included in the pack to suit your ear size. Fitting the Ergobud* 6 different sizes of Ergobud* are included in the pack to suit your ear size. You can adjust the Ergobud position that you feel the most comfortable.
-
Page 11: Troubleshooting Guide
To find out more, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. For better sound quality, avoid placing the METAL too close to your face as the mic may rub with face and generate noise. - Page 12 • Check the regulation in your area if you plan to use your headset while driving. • Turn off your headset before boarding an airplane. • CAUTION: Danger of explosion if battery is incorrectly replaced. Dispose of batteries according to local regulations. Do not dispose as household waste. 11 I BLUETREK METAL...