Line Pitch - Printek FormsMaster 8000se Series Programmer's Manual

Escape Sequence:
Hexadecimal:
Print Single Character
Prints the character n from the all characters chart. This sequence may be used to print a character that is
normally treated as a control code.
Example: The following escape sequence will print a left arrow. This character is normally not printable,
since it is treated as the ESC control code.
Escape Sequence:
Hexadecimal:
Print Characters
Prints the next n1 + (n2 x 256) characters from the all characters chart. This sequence may be used to print
characters that are normally treated as a control codes.
Example: The following escape sequence will print an up arrow, a down arrow, a right arrow, and a left
arrow.
Escape Sequence:
Hexadecimal:
Select Print Mode
Selects print mode n according to the following chart. Overrides the "Font" value in the forms menu.
n
0
1
2
3
Example: The following escape sequence will select the IBM Proprinter letter quality font.
Escape Sequence:
Hexadecimal:

Line Pitch

Select 8 LPI
Sets the line spacing to 1/8 of an inch per line (8 lpi). Overrides the "Lines/Inch" value in the forms menu.
Escape Sequence:
Hexadecimal:
ESC 6
1B 36
ESC ^ ESC
1B 5E 1B
ESC \ 4
1B 5C 04
Print Mode
Draft
Fast Draft 12 cpi
Letter Quality
Letter Quality
ESC I 3
1B 49 03
ESC 0
1B 30
IBM Proprinter Emulation
0 CAN EM SUB ESC
00 18 19 1A
ESC ^ n
ESC \ n1 n2
1B
ESC I n
ESC 0
51