Character Sets - Printek FormsMaster 8000se Series Programmer's Manual

Character Sets

Select Font
Select font n according to the following table.
n
0
1
2
3
10
11
12
13
32
33
34
36
37
38
44
45
46
64
65
66
71
75
Overrides the "Font" value in the forms menu. If the specified font is not installed, the "Font" value in the
forms menu will be used to select the default font.
Example: The following escape sequence will select the OCR-B Optical Quality font.
Escape Sequence:
Hexadecimal:
Print Single Character
Prints the character n from the selected font. This sequence may be used to print a character that is normally
treated as a control code.
Example: The following escape sequence will print a left arrow, if a Proprinter font is selected. This
character is normally not printable, since it is treated as the ESC control code.
96
Font
Epson FX Draft
Epson FX Letter Quality
Proprinter PC Draft
Proprinter PC Letter Quality
EBCDIC Draft
EBCDIC Letter Quality
OCR-A Optical Quality
OCR-B Optical Quality
Epson FX Fast Draft
Epson FX Draft
Epson FX Letter Quality
Proprinter PC Fast Draft
Proprinter PC Draft
Proprinter PC Letter Quality
PC Latin II (Slavic) Fast Draft
PC Latin II (Slavic) Draft
PC Latin II (Slavic) Letter Qualit
EBCDIC Fast Draft
EBCDIC Draft
EBCDIC Letter Quality
OCR-A Optical Quality
OCR-B Optical Quality
ESC F 75
1B 46 4B
Printek Emulation
ESC F n
ESC \ n