Character Attributes; Horizontal Position - Printek FormsMaster 8000se Series Programmer's Manual

Character Attributes

Select Graphic Rendition
Selects the graphic rendition n from the following table.
n
0
1
3
4
For italic mode to work correctly, an Epson FX font must be selected (check the "Font" value in the forms
setup menu). The other available fonts do not include italic characters.
Example: The following escape sequence will select emphasized mode.
Escape Sequence:
Hexadecimal:

Horizontal Position

Carriage Return
Causes the current line to be printed, and then sets the current print position to the left margin. If "Auto LF"
is set to "On" in the interface setup menu, a line feed will also be performed.
Control code:
Hexadecimal:
Backspace
Causes the current line to be printed, and then moves the current print position one space to the left. The
actual distance moved depends on the current character spacing. Backspacing can be done up to, but not
beyond, the left margin.
Control code:
Hexadecimal:
Rendition
Normal
Emphasized
Italic
Underline
ESC [ 1
1B 5B 31
CR
0D
BS
08
m
6D
ANSI X3.64 Emulation
ESC [ n m
CR
BS
9