Printek FORMSMASTER 8000SE Operator's Manual page 39

Informing the Printer That the New Form is Loaded
11. Press the LOAD button. The display will now show that the new form
has been "loaded".
12. If your printer is a FormsMaster 8003se you may repeat the above
steps to load additional forms at this time.
13. Close the paper door.
14. Make sure the correct form to be positioned for printing is selected
and press either the LOAD button or the ONLINE button. The LOAD
button will position the form for printing but will not place the printer
on line. The ONLINE button will both position the form and place the
printer on line. Note that the first time the printer is placed on line
after a new form is loaded, the form(s) currently known to be loaded
by the printer will scroll across the display as the printer goes on line.
The operator should observe the forms displayed to confirm that the
correct forms are recognized as loaded.
New form loaded in tractors
D A I L Y O P E R A T I O N
31