Toro Riding Mower Safety - Toro TimeCutter SW 5000 Operator's Manual

Hide thumbs Also See for TimeCutter SW 5000:
Table of Contents

Advertisement

Never overfill the fuel tank. Replace the fuel cap
and tighten it securely.
General Service:
Never operate a machine inside a closed area.
Engine exhaust contains carbon monoxide, which
is an odorless, deadly poison that can kill you.
Keep nuts and bolts tight, especially the blade
attachment bolts. Keep equipment in good
condition.
Never interfere with the intended function of a
safety device or to reduce the protection provided
by a safety device. Check their proper operation
regularly.
Keep the machine free of grass, leaves, or other
debris buildup. Clean up oil or fuel spills. Allow the
machine to cool before storing.
Stop and inspect the equipment if you strike an
object. Repair, if necessary, before restarting.
Never make any adjustments or repairs with the
engine running.
Grass catcher components are subject to wear,
damage and deterioration, which could expose
moving parts or allow objects to be thrown.
Frequently check components and replace
with manufacturers' recommended parts, when
necessary.
Mower blades are sharp and can cut. Wrap the
blade(s) or wear thickly-padded gloves, and use
extra caution when servicing them.
Check for proper brake operation frequently.
Adjust and service as required.
Maintain or replace safety and instruction decals
as necessary.
Use only genuine Toro replacement parts to
ensure that original standards are maintained.

Toro Riding Mower Safety

The following list contains safety information specific
to Toro products or other safety information that you
must know that may not be included in the ANSI
standards.
Shut off the engine, ensure that the brake is
engaged, disengage the blade-control switch,
remove the key and disconnect the spark-plug
wire(s) before performing any service, repairs,
maintenance or adjustments.
Keep your hands, feet, hair, and loose clothing
away from attachment discharge area, underside
of mower and any moving parts while engine is
running.
Do not touch equipment or attachment parts which
may be hot from operation. Allow to cool before
attempting to maintain, adjust or service.
Battery acid is poisonous and can cause burns.
Avoid contact with skin, eyes, and clothing. Protect
your face, eyes, and clothing when working with a
battery.
Battery gases can explode. Keep cigarettes,
sparks and flames away from battery.
Use only Toro approved attachments. Warranty
may be voided if used with unapproved
attachments.
If loading the machine onto a trailer or truck, use
a single, full-width ramp only. The ramp angle
should not exceed 15 degrees.
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

74790Timecutter sw 54257478474793

Table of Contents