Transferring To The Redial List - AT&T Synapse SB67040 User Manual

Description Setup

Transferring to the Redial List

To transfer a call to a number in the redial list:
Figure. 86
SB67040 Remote Handset User's Guide - Call Transfer 70
Answer
Make Call Call
1. Press OPTIONS from transfer setup mode and display the screen shown in Figure 86.
2. Press down NAVIGATION key once to highlight Redial, press SELECT or 2. and
display the screen shown in Figure 87.
3. Press the up or down NAVIGATION key to scroll through redial list entries until
desired entry is highlighted.
4. Press SELECT or PHONE. User will go to transfer confirmation mode and display the
screen shown in Figure 88.
5. Press XFER to complete the transfer. and go to transfer confirmation mode.
Figu
Voice
Mail Hold/Park
Figure. 88
Call
Transfer Conference Trouble Glossary