AT&T Synapse SB67040 User Manual page 30

Description Setup
To access the Handset Registration function:
Figure. 15 User Settings Cordless
Figure. 16 Cordless Registration
SB67040 Remote Handset User's Guide - Setup
Answer
Make Call Call
Voice
Mail Hold/Park
6. Press the SELECT function key to display the User Settings menu
shown in Figure 15.
7. Press 5 on the keypad or press the down arrow on the NAVIGATION
button four times to move the highlight to Cordless Registration as
shown in Figure 15 and press SELECT.
8. Observe that the Cordless Registration menu shown in Figure 16
displays.
Note For security reasons, the registration process on both
deskset and handset will terminate after the timeout
period of 60 seconds if registration is not successful.
9. Press 1 or press SELECT
to display the Cordless
Handset Registration
splash screen shown in
Figure 17.
10. Press the Register
programmed key shown in
Figure 17.
Note Registration can only be terminate by pressing the
CANCEL key on the deskset. The handset will continue to
attempt registration until it times out because the handset
will not know the deskset has terminated registration.
27
Call
Transfer Conference
Figure. 17 Handset Not Registered
Trouble Glossary