Aiphone AX-084C Quick Start Manual page 5

7) Saving / Uploading
Step 1: Connect PC / Laptop to
AX CEU as shown on page 1.
Use supplied USB-to-Serial
Converter and Gender Changer
if a Serial port is not available.
Step 2: Save the settings that you
have made by clicking on File, and
then Save As. Use the name of the
job, or something that describes the
job as the file name, so you can
refer back to it later.
Step 3: Click on Tool, then CEU,
then Upload to upload the system
settings to the AX CEU.
Step 4: Click Yes to the
confirmation message asking if you
want to overwrite the information in
the Central Exchange Unit.
Step 5: Enter the password to
authorize the upload. The default
password is 9999.
Click OK, and the new settings
will upload to the CEU.
Step 6: When upload is complete,
remove the connector cable from
the CEU and save in a secure
location. (This will be required
when any changes are to be
made to the system programming
in the future.)
RS-232C
RS-232C plug
on AX-CEU
To PC / Laptop
USB port
Actual unit:
Page 5